COURSE NAME:Piping Stress Analysis


This course can be scheduled at your convenience, to request this course please click here
Objectives: Understanding of Failure of Pipelines, Reasons of Failures and Supporting System for Pipelines for High Temperature Lines due to over stressed Selection of appropriate Layout and Supporting for High Temperature Pipelines to keep stresses within limits Validation of the Suitability of Piping Layout of High Temperature Pipelines.
OUTLINE: Contents: • Overview of stress behavior of materials • Stress – strain curve • Study of Strength and Failure of Engineering materials, • Study of various induced stresses • Failure of material due to induced stresses (Modes of failure) • Failure of pipelines due to Creep and Fatigue, • Low temperature brittle fracture • Guidelines stipulated by ASME 31.3 for evaluation of induced stresses, • Cyclic stresses and stress reduction factor as per B 31.3 • Methods for reduction and limiting the induced stresses, • Concept of pipe flexibility, flexibility factor, stress intensity factor (B 31.3) • Means of increasing flexibility • Expansion joints • Vibrations: Causes of pipe vibration • Flow induced vibrations • Vibration effects on piping system • Methods of Vibration dampening • Acceptance limitations of nozzle loads for Pumps and Compressor • Piping Flexibility Analysis carried out using computers (CAESAR II) • Final Quiz and feed back
WHO SHOULD ATTEND: Who shall attend? • Engineers involved in design/ construction/ maintenance of Piping System
    • 5 Day(s)

    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company