COURSE NAME:SWP (Safe Work Permit) Standard Overview


UPCOMING EVENTS


START DATE END DATE CITY/COUNTRY PRICE Request
This course can be scheduled at your convenience, to request this course please click here
INTRODUCTION:

Certain safeguards that normally protect the worker may have to be removed when repair or maintenance work is performed. When this occurs, the hazards involved need to be identified and a safe work system developed to eliminate or control these hazards

A safe work permit is document that identifies the work to be done, the hazard(s) involved, and the precautions to be taken. It ensures that all hazards and precautions have been considered before work begins. Safe work permits should always be used when work is performed by an outside agency or employer.

OBJECTIVES:

At the end of this session you will:

  • be familiar with jobs requiring safe work permits.
  • be generally familiar with the Safe Work Permit system.
  • pass a quiz with a score of 100%.
OUTLINE:

 

A safe work permit is a written record that identifies:

  • (1) the date, time of issue, and time of expiry of the permit;
  • (2) the location of the work —it must be as specific as possible;
  • (3) the department or company doing the work;
  • (4) a description of the work to be done;
  • (5) any toxic, corrosive, flammable, or other dangerous materials in the immediate work area;
  • (6) whether the work area has been inspected and found free of the above materials;
  • (7) the need for fire protection;
  • (8) the need for isolation — electrical and mechanical hazards locked out and tagged,
  • piping blanked off, tagged, disconnected, drained, or vented;
  • (9) the need for ventilation — air, steam, inert gas purge;
  • (10)the need for testing prior to or during the work for: harmful substances;  combustible gases; SH013 — General Safety 5
  • oxygen deficiency; other hazards e.g. radiation;any specific health hazard — is Material Safety
  • Data Sheet information required?;
  • (11)the need for specific personal protective equipment to protect the worker from the hazard;
  • (12)the need for specific personal protective equipment to protect the worker from the hazard;
  • (13)the need for emergency procedures and competent rescue personnel;
  • (14) a special instructions and comments section — special procedures, special precautions;
  • (15) a general instruction-to-receiver section;
  • (16)the name and job title of the person who issued the permit and when;
  • (17)the name and job title of the person who received the permit and when;
  • (18)that the work has been completed and the permit signed by the person returning it; and
  • (19) the name of the person signing off the permit and whether or not the work has been completed.
WHO SHOULD ATTEND:
  • This course is invaluable for health and safety professionals who wish to develop their Safety management system. It is particularly useful for the Supervisor of the plant who regularly assesses the health and safety performance of their plants particularly. Or anyone who want to improve their knowledge about this course.
DURATION:
    • 3 Day(s)
  •  


    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi
    Sabic

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami
    Sabic

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood
    Sabic

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi
    Sabic

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy
    Mobily

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani
    Sabic

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud
    Sabic

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company