COURSE NAME:Testing for Chemical Deterioration & Homogeneity of Materials


This course can be scheduled at your convenience, to request this course please click here
Objectives: • Mechanical engineers and senior technicians to give professionals scientific and practical background for testing of chemical deterioration & homogeneity of materials.
OUTLINE: Contents: Hydrogen Induce Cracking (HIC) and Sulfide Stress Corrosion Cracking (SSCC) - 4 point bend test: • Measuring dimension of samples and calculating required test solution volume. • Cleaning and test for degreasing as per ASTM F21. Calculation of deflection based on applied load which depends on steel grade. • Entering required data for the test. • N2 purging and H2S gas bubbling for HIC and SSCC (4 point bend test) . • Idiomatic titration of test solution. • Monitoring and inspection of test. • Neutralization of test solution before deposing to waste tank. • Record of chemical consumption and waste solution. • Evaluate test result. Sulfide Stress corrosion cracking (SSCC) test, (Uni-axial Constant Tensile Load): • Calculate applied load based on the steel grade. • Loading and UN loading of test specimen into the testing machine. • Familiarization with gas management. • Selection of required parameters to enter the test mask. • Evaluation of results. Hardness Test: • Selection of type of harness based on type of steel grade and geometry of specimen. • Operation of hardness testing Machines. • Calibration of hardness machine. • Selection of indenter. • Standard practice of harness testing as per ASTM E384, E10, E92 and E18 . • Calculation of hardness number. • Conversion of one hardness to other type of hardness as per ASTM E140. Grain Size Analysis: • Selection of sample for grain size analysis. • Micro constituent of steel. • Standard practice of grain size analysis as per ASTM E112, E930, E1382. • Parameter setting for optical microscope for grain size analysis • Evaluation of Grain size Determination of Inclusion Rating: • Basic Knowledge of different type of non metallic inclusions in steel • Selection of sample for inclusion rating • Physical appearance of inclusions in cast steel/iron • Physical appearance of inclusion rolled product. • Standard practice for inclusion rating as per ASTM E45 and ASTM E1245 specification • Calibration of optical microscope • Parameter Setting for optical microscope for inclusion analysis • Evaluation of inclusion content in steel.
WHO SHOULD ATTEND: Who Should Attend? • This course is suggested for QA/QC, Operation staff, Supervisors, Technicians & Mechanical Engineers.
    • 5 Day(s)

    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company