COURSE NAME:Hose Standard


This course can be scheduled at your convenience, to request this course please click here


In this course, the participants will review their information about Hose standard they will encounter in the work place.

  • Hose Introduction & Types.
  • Hose and Connector Identification. 
  1. The importance of understanding the application, useful factors to consider
  2. Hose sizing
  3. Industry standards for hose – EN, ISO & SAE
  4. Hose end terminations, material types and end terminations commonly used in the fluid power industry
  5. Hydraulic fluid types


  • Hose Assembly


  1. The industry standard method of measuring hose assembly lengths
  2. Cutting the hose to length – the importance of a good, clean cut
  3. Skiving – internally and externally
  4. Preassembly of one piece and two piece couplings
  5. Angular orientation and hose bias when the hose assembly has two angled connectors
  6. Crimping / swaging.
  7. Covering all aspects from correct die selection, machine setting, correct positioning of the hose assembly  within the machine, measuring the crimp diameter, reducing the crimp diameter if necessary and ensuring that the operation has been completed correctly
  8. Typical sample inspection plan for volume hose assembly manufacture
  9. Pressure testing of hose assemblies – ratios based on working pressure and application
  10. Cleaning and protecting of hose assemblies prior to supplying to the customer



  • Installation


  1. Correct installation of adaptors and hose assemblies
  2. Good & bad practice for installation, considering issues such as; bend radius, natural hose bias and reducing damaged  caused by abrasion, heat, kinking and twisting
  3. Environmental conditions which can cause hose and connector degradation
  4. Good & bad practice when tightening up connectors


  • Hose and Connector Failure


  1. Reasons for hose and connector failure. How to reduce / eliminate the likelihood of failure occurring
  2. Re-ending hydraulic hose assemblies – DON’T & don’t mix and match. The stance of the BFPA and other bodies within the fluid power industry on these two important topics.




    • 3 Day(s)

    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company