COURSE NAME:Vibration Measurements and Diagnostics


UPCOMING EVENTS


START DATE END DATE CITY/COUNTRY PRICE Request
This course can be scheduled at your convenience, to request this course please click here
INTRODUCTION:
  •  Most of plant's equipments are rotary. Therefore, understanding the principles of rotating equipments dynamics is very essential. Identification of failure modes and monitoring methods of failure symptom are important as well, for establishing the most effective maintenance program. High level of diagnostic accuracy is expected from vibration analysis because of the non-availability of stand-by equipments. There is also the need for continuous and trouble-free operation of all critical equipment.
OBJECTIVES:
  • Understanding Vibration analysis and problem diagnostics of all the major machinery problems through spectrum and phase characteristics, which are common for all industrial equipments
  • Design of vibration suppression and vibration isolation
OUTLINE:
  1. Introduction to Vibration elements and Different types of vibration and vibration characteristics  
  2. Design for vibration suppression with   application
  3. Vibration Instrumentation
  4. What is Condition Monitoring and Machinery Vibration Characteristics, Machine Health Assessment as per ISO standards
  5. Vibration testing and experimental analysis with case studies

  Day One:

  1. Introduction to Vibration elements and Different types of vibration and vibration characteristics     
  • Vibration elements and concepts
  • Base excitation,
  • Rotating unbalance
  • Transmitting forces and Transmissibility 

 Day Two:

  1. Design for vibration suppression with  application
  • Acceptable level of vibration 
  • Vibration severity
  • Vibration isolation
  • Vibration absorbers
  • active vibration suppressions

 Day Three:

  1. Vibration Instrumentation
  • Vibration measurements
  • Pre-amplifiers
  • Signal conditioning
  • Vibration signal analysis and Fast Fourier Transform

 Day Four:

  1. What is Condition Monitoring and Machinery Vibration Characteristics, Machine Health Assessment as per ISO STANDARDS?
  • Fault diagnosis for
    • Unbalance
    • Misalignment
    • Mechanical Looseness
    • Bent Shaft
    • Eccentricity
    • Coupling Inaccuracies
    • Bearing Defects
    • Gear Related Problems
    • Defective Belt Driven System

Day Five:

  • Fault diagnosis for
    • Bearing Defects
    •  Gear Related Problems
    •  Defective Belt Driven System
    • Vibration testing and experimental analysis with case studies
    • Frequent failure modes and trouble shooting of some mechanical foundations
WHO SHOULD ATTEND:
  • Mechanical Engineers and high qualifying Technicians
  • Lament predictive maintenance for rotating equipments.
  • Other professional who wants to have a better understanding of machine dynamics 
DURATION:
    • 5 Day(s)
  •  


    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi
    Sabic

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami
    Sabic

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood
    Sabic

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi
    Sabic

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy
    Mobily

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani
    Sabic

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud
    Sabic

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company