COURSE NAME:Global Personal Doing Elevated Work


This course can be scheduled at your convenience, to request this course please click here


This information sheet explains how to prevent falls, notjust mitigate the effects once     a fall occurs. It also explains how to select suitable fall protection equipment where the risk cannot be adequately controlled.




The guidance is not intended to cover risks associated with work near 

to (or on) overhead power lines, people climbing out of the MEWP (this is not normally allowed), and the detailed requirements for information, instruction and training  associated with the operation of MEWPs.



An analysis was made of  FOD’s reported and

investigated incidents relating to:

● MEWPs collapsing;

● MEWPs overturning;

● people being thrown from the carrier;

● the carrier being trapped against fixed structures

(the carrier is commonly referred to as the basket

or cage).


The following primary causes were identified:

● equipment failure;

● ground conditions;

● outriggers (not used or faulty);

● trapping against fixed structure;

● MEWP being struck by vehicle;

● load/unload of MEWP under power;

Controlling the risk


Firstly assess whether risks can be eliminated, for


● remove uneven ground or excavations (eg

adjusting the phasing of the work);

● remove soft ground by compacting.


Anyone who is working related to this course then need to increase their skills to ensure their safety with good results and also this is suitable for Manager, Supervisor & Operator.

    • 3 Day(s)

    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company