COURSE NAME:Electrical Power Analyzer


UPCOMING EVENTS


START DATE END DATE CITY/COUNTRY PRICE Request
This course can be scheduled at your convenience, to request this course please click here
INTRODUCTION:

A power analyzer is used to measure electric power signals to determine the load's ability to function properly with that electric power. Without the proper electric power, an electrical device (or load) may malfunction, fail prematurely or not operate.  Power quality analyzer technology tracks several electrical parameters, which include AC voltage, AC current, and frequency. Electrical parameters include demand and peak demand.  Typically, power parameters are measured in watts (W), volt amperes (VA), and volt ampere reactive (VAR).

A power quality analyzer can also detect repetitive, cyclical disturbances both within and outside of a facility. These problems will be repetitive and cyclical in nature, definitely power-related, and line-to-line. Examples include voltage sags and surges, momentary interruptions by circuit breaker operations, and power interruptions.

OBJECTIVES:

Upon completion of this course, participants will be able to:

  1. Understand the electrical power analyzer measurements
  2. Know instantaneous and recording data of power analyzer
  3. Know power quality is and why it is important to your facility.
  4. Understand power quality impacts your electrical system and equipment.
  5. Learn properly and safely measure power factor and power quality factors.
  6. Read various power analyzer  outputs, charts, graphs and reports.
  7. Troubleshoot and diagnose power analyzer problems.
  8. Use measuring instrument to address all power quality needs.
OUTLINE:

Day 1:

Electrical Refresher

  • Introduction
  • Electrical Fundamentals
  • Electrical Measurements
  • Connection  the different electrical measurments
  • Safety

Understanding Power Analyzer & Power Quality

  • What it is
  • Why it is Important
  • How it is measured
  • Cause and Effect

Day 2:

Diagnosing Power Quality Problems

  • Troubleshooting Overview
  • Symptoms of Power Quality Problems
  • Power outages
  • Tripping circuit breakers and ASDs
  • High utility bills
  • Flickering lights
  • Equipment running noisy and hot
  • Premature equipment failure
  • Poor performance & unexpected shutdowns
  • Lost data in electronics

Day 3:

Understanding Common Power Quality Disturbances

  • Causes and Fixes
  • Voltage dips & swells
  • Transients
  • Noise interference
  • Harmonic distortion
  • Under / over voltage or current
  • Voltage unbalance

Using the Power Analyzer to Identify Power Quality Problems

  • Understand the user interface and how to setup the tool
  • Setup
  • Function preferences
  • Parameters for each testing mode
  • User preferences
  • Set general operation parameters of the 435
    • Use the Scope mode
    • Use detail zoom and cursors to analyze while recording continues
    • Capture Dips & Swells
    • Measure harmonics (voltage, current, and power harmonics up to the 50th)

Day 4:

Inter-Harmonics

  • Make Power & Energy measurements
    • Real Power (kW)
    • Apparent Power (kVA)
    • Reactive Power (kVAR)
    • Power Factor (W/VA) and DPF (cos Phi)
  • Monitor energy use
  • Measure Flicker including short and long term severity
  • Measure Unbalance
  • Capture Transients
  • Measure Inrush
  • Use Mains Signaling
  • Set up and use Logger and PowerLog
  • Use the Report Generator

 

Day 5:

Power Quality Analyzer ( PQA ) Applications

  • Frontline troubleshooting - quickly diagnose problems on-screen to get your operation back online
  • Predictive maintenance - detect and prevent power quality issues before they cause downtime
  • Quality of service compliance - validate incoming power quality at the service entrance
  • Long-term analysis - uncover hard-to-find or intermittent issues
  • Load studies - verify electrical system capacity before adding loads
  • Energy assessments - quantify energy consumption before and after improvements to justify energy saving devices
WHO SHOULD ATTEND:

This course is designed for anyone who is responsible for electrical system installation, maintenance and troubleshooting in commercial and industrial facilities

  • Plant Electricians “Engineers & Technicians”
  • All Building Maintenance Personnel
  • All Plant & Facility Maintenance Personnel
  • Building Engineers
  • Plant & Facility Managers
  • Apprentice and Experienced HVAC Technicians
  • Energy Management Personnel
  • Electrical Contractors
  • Any Technician needing to develop Multi-Craft Skills
DURATION:
    • 5 Day(s)
  •  


    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi
    Sabic

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami
    Sabic

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood
    Sabic

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi
    Sabic

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy
    Mobily

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani
    Sabic

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud
    Sabic

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company