COURSE NAME:Electrical Protection System


 28-07-2019  01-08-2019  Dammam/Saudi Arabia Register

Protection of low, medium and high voltage power systems requires an understanding of system faults and their detection, as well as their safe disconnection from the power system. This course presents a comprehensive and systematic description of the concepts and principles of operation and application of protection schemes for various power system elements such as feeders, transformers, motors, buses, generators, etc. The course begins with an overview of power system faults and the protection scheme requirements for the detection and coordinated clearance of these faults. Protection requirements for cogeneration and non-utility generation, and interconnection with the utility power system are covered in detail. This course deals with protection systems from a practical perspective, and includes important functional aspects such as testing and coordination of protection systems. It is specially designed for industries and utilities, which depend on proper system protection for operational efficiency and minimizing damage to equipment.. 

  • The concepts, principles of operation, and application of H.V. power system protective relaying.
  • The analysis of relay operations for various power system faults.
  • The requirements of commissioning and maintenance testing of protection schemes.

Day One:


  • Introduction, Overview & Discussion of Objectives
  • Power System Faults
  • Components of Protection Schemes
  • Current Transformers & Voltage Transformers






Day Two:


  • Current Transformers & Voltage Transformers
  • Power System Neutral Grounding
  • Ground Potential Rise During Power System Faults
  • Feeder Over current Protection


Day Three:


  • Coordination Of Electrical Protection Systems
  • Bus Protection
  • Motor Protection, Starting and Control
  • Transformer Protection



Day Four:


  • Chapter 7: Transformers Protection. (cont’d)
  • Generator Protection
  • Cogeneration & Non-Utility Generation Protection



Day Five:


  • Transmission Line Protection
  • Capacitor Protection

Open Forum, Discussion & Wrap-Up


The course is intended for engineers, technicians, technologists, control engineers, operators, designers, supervisors, and managers in the industrial, consulting, and utility fields involved in design, regulatory inspection, operation and maintenance who require knowledge of electrical power system protective relaying techniques. The course will also be very useful to those generally knowledgeable in protective relaying, but who may require a refresher or update.

    • 5 Day(s)

    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company