COURSE NAME:Pipe & Valves


This course can be scheduled at your convenience, to request this course please click here

Pipes and Valves Training is designed to familiarize participants with the basic procedures for performing routine maintenance on pipes and valves. With Pipes and Valves Training, participants should be able to describe tasks involved in preparing for pipes and valves maintenance and explain how to adjust and replace valve packing. They should also be able to describe how to disassemble a valve, inspect its parts, perform maintenance on it, and reassemble it.



  • Understand how lapping and spotting-in are performed on a valve seating area
  • Identify materials for a piping installation using a Bill of Materials
  • Understand fitting take-off and actual pipe lengths required from both blueprints and existing installations
  • Identify how to correctly tighten and torque six-hole, eight-hole, and twelve-hole flanges
  • Understand how to correctly assemble socket-weld piping
  • Identify typical procedures for performing a temperature inspection, a sound inspection, and a visual inspection of a steam trap
  • Understand a basic procedure for disassembling a valve


  • Pipes and Valves: Basic Pipefitting Skills
  • Pipes and Valves: Calculating Offsets
  • Pipes and Valves: Installing Flanges, Copper, and Plastic Pipe
  • Pipes and Valves: Installing Pipe Hangers and Supports
  • Pipes and Valves: Installing Screw and Welded Pipe
  • Pipes and Valves: Motor Operators
  • Pipes and Valves: Pipes and Pipe Fittings
  • Pipes and Valves: Steam Traps
  • Pipes and Valves: Valve Maintenance
  • Pipes and Valves: Valve Types and Operation
  • Special Calculations


    • 3 Day(s)

    The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
    Mohammed F. Alotaibi

    Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
    Ahmed Al-Yami

    You are doing excellent bringing such very talented instructor. Please keep it up.
    Ahmed Afifi
    Al-Zamil CoolCare

    I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
    Zaki Ali Aldawood

    This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
    Talal Saad AlHasawi

    ITC service was in overall excellent. Thanks.
    Wael M. Morsy

    This course was good and a nice guide to the PMP exam. Thanks.
    Yazeed Mohamed Mreki
    General Authority of Civil Aviation (GACA)

    It was good course & good preparation with excellent instructor. Thanks a lot.
    Faisal Mahdi Al-Qahtani

    It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
    Abdul-Moniem Al-Humoud

    It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
    Mohammed Amjad
    Al-Suwadi Services

    The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
    Noel V. Garan
    Coldstorec Group Of Saudi Arabia

    Instructor was well prepared and knowledgeable I gain lot of useful information.
    Gulam Khan
    Saudi Aramco

    It was a good learning experience. Got to know the concept involved in key account.
    Muthuraman Nachiappan
    Al-Suwadi Services

    The instructor Mr. Ahmed Sabry has a very nice spirit.
    Salam Fakhoury
    Al Khodari Company

    It is very useful to us and increase our knowledge.
    Mohammed Rashed Afifi
    Al Khodari Company

    The course is excellent and helpful. It help me in organizing the work in more safe manner.
    Muzammil Hayat
    Al Khodari Company

    The instructor is very knowledge and hard working, his way of teaching is very good.
    Ibrahim Darwish
    Al Khodari Company