Contractor Workforce Qualification Assurance Program(CWQAP)

Introduction to Contractor Workforce Qualification Assurance Program(CWQAP)


The Qualification Skills all vendor technicians should take are:

  • Safety for all Skills Safety
    • Must understand the requirements of compliance with personal protective equipment (PPE). Must wear PPE in accordance with job function and work conditions
    • Must understand isolation and lockout procedures and follow those procedures in case of emergency
    • Must be familiar with emergency response procedures
    • Must understand the requirements for compliance with work permit procedures and follow those procedures when applying for necessary work permits
  • Minimum Requirements for Instrumentation
    • Must be knowledgeable in the interpretation of instrument symbols, drawings and tracing signals in control loops
    • Must be able to troubleshoot and repair pneumatic control loops and their components, including transducers, control valves, pneumatic controllers, relays, positioners, actuators, etc.
    • Must be familiar with operation, testing and replacement of common process sensing elements, such as pressure, temperature, level and flow
    • Must be familiar with various instrumentation tools, such as multi-meters, decade boxes, pneumatic gauges, calibrators, hydraulic pumps and other measuring devices.
    • Must be familiar with the operation of transmitters (both electronic and pneumatic) in oil and gas facilities and be capable of replacing them
    • Must be familiar with the operation and settings of solenoid valves and pressure switches
  • Minimum Electrical Requirements
    • Must be able to understand electrical terminology and identify electrical symbols in schematics
    • Must understand the operation of single and three-phase motors
    • Must be able to use electrical measuring devices
    • Must have knowledge of serial and parallel circuits
    • Must be able to identify and know the use of electrical conduits and their accessories
    • Must be able to take electrical measurements of current, voltage and resistance and analyze the accuracy in circuits
    • Must be able to interpret electrical name plates and read electrical drawings
    • Must be familiar with basic electrical units
  • Minimum Requirements for Machinists
    • Must know the basics of pumps, packings and mechanical seals and be able to identify and replace their parts
    • Must know the basics of bearings and lubrication
    • Must be able to identify symbols in schematic drawings and operation of various types of valves
    • Must know the basics of imperial and metric measuring methods
    • Must know the basics of transmission units
    • Must know machine shop and print drawing manual terminologies
    • Must be able to calculate coupling and shaft limits
    • Must know the basic principles of compressors
Click Here
To Qualify Your Employees

The presentation is generally appealing to me. The dedication & devotion of the instructor are both laudable & admirable.
Mohammed F. Alotaibi
Sabic

Really this course is important for any inspector, so I will recommended it for our employees. And thanks a lot!
Ahmed Al-Yami
Sabic

You are doing excellent bringing such very talented instructor. Please keep it up.
Ahmed Afifi
Al-Zamil CoolCare

I would like to appreciate you as well as the instructor for a good training due to the fact that the helping to gain new information about the types of valve with advantages and disadvantage as well. Many thinking.
Zaki Ali Aldawood
Sabic

This course was very beneficial and helpful to understand one of the Major NDT method. I encourage ITC to continue with this performance.
Talal Saad AlHasawi
Sabic

ITC service was in overall excellent. Thanks.
Wael M. Morsy
Mobily

This course was good and a nice guide to the PMP exam. Thanks.
Yazeed Mohamed Mreki
General Authority of Civil Aviation (GACA)

It was good course & good preparation with excellent instructor. Thanks a lot.
Faisal Mahdi Al-Qahtani
Sabic

It was a nice course to have. I suggest taking this course with the same instructor to other people. Thanks for the instructor for his kindness & helfull during the course.
Abdul-Moniem Al-Humoud
Sabic

It is very important course, which enable us to improve our knowledge to work approaching our big account and can be recall us the key account. This is will support us to active result for the best of the Co.
Mohammed Amjad
Al-Suwadi Services

The instructor is highly and technical knowledgeable in explaining all the subject in the course taken.
Noel V. Garan
Coldstorec Group Of Saudi Arabia

Instructor was well prepared and knowledgeable I gain lot of useful information.
Gulam Khan
Saudi Aramco

It was a good learning experience. Got to know the concept involved in key account.
Muthuraman Nachiappan
Al-Suwadi Services

The instructor Mr. Ahmed Sabry has a very nice spirit.
Salam Fakhoury
Al Khodari Company

It is very useful to us and increase our knowledge.
Mohammed Rashed Afifi
Al Khodari Company

The course is excellent and helpful. It help me in organizing the work in more safe manner.
Muzammil Hayat
Al Khodari Company

The instructor is very knowledge and hard working, his way of teaching is very good.
Ibrahim Darwish
Al Khodari Company